LOKLiK iCraft™ Fine-point Blade Kit

The iCraft fine-point blade kit contains one blade and blade holder. With a cutting angle of 45°, this blade can be used on lightweight to medium-weight materials, such as paper,different types of vinyl, stickers, cardstock, reflective film,... Whether you're cutting intricate details or working with different materials, this cutting blade offers the precision you need.

If you want to cut heavier and sturdier materials like leather and thicker cardboard, we recommend the iCraft deep-point blade kit.

Please note:

• These blades are not compatible with the LOKLiK Crafter cutting machine.
• These iCraft fine-point blades use a different blade holder than the deep-point blades.

This blade can be used for cutting: 

• Heat transfer vinyl
• Adhesive vinyl
• Cardstock
• etc.

 How to install a new cutting blade in your LOKLiK iCraft™:

1. Power off the machine: Ensure the cutting machine is fully powered off before beginning the blade replacement.
2. Remove the old blade: Carefully open the blade holder by unscrewing it and remove the old blade.
3. Insert the new cutting blade: Take a new fine-point blade from the package and place it into the blade holder with the sharp side facing down.
4. Secure the blade holder: Screw the blade holder back into place to secure the new blade.
5. Test the blade: Power on the machine and perform a test cut on a scrap piece of material to ensure the blade is properly installed and functioning as expected.

Care and maintenance

Store unused blades in a dry and safe place to prevent rust and damage. Regularly cleaning your cutting blade and holder can extend the blade's lifespan.

Cutting parameters

Download our chart to help you determine the right settings when using different materials. If you can't find your material in the chart, try a test cut with a similar material setting. If you can't cut through the material under maximum pressure, try to cut several times.